Results: 1 - 12 (of 31)  |  Show all
  • The Response Electronics Solar Powered Entrance Light with PIR Motion detection is a completely wirefree, quick and easy to fit security solution that both welcomes your guests and alarms potential intruders. The ultra bright entrance light has 1 Super-bright high intensity white LED giving up to 4 hours illumination on a full charge.

    The in-built PIR detector senses movement within a 7m radius to an angle of 90°, providing instant illumination of the LED light upon activation.

    Useful info:

    • Wireless - no mains power required
    • Solar powered - energy saving
    • Up to 4 hours continuous light from a full charge in ON mode
    • Detection range 90°, Distance 7m
    • Time delay is 50 seconds per activation
    • Illuminates up to 25m radius (maximum)
    • Automatically turns on when motion detected
    • Manual switch for On, Off or Auto
    • Super-Bright White LED
    • Mounting kit provided
    • Ideal for Automatic illumination of front and rear entrance areas, side passages, pathways, steps and dark areas

  • The miGuard RFID tag MGTAG26 is a wirefree Proximity tag that will disarm the miGuard G5 and A11 alarm systems with a simple swipe across the panel. The tag can also disarm the alarms if a MGKP700 RFID Keypad is linked to the alarms. If an electronic door lock is also attached, the tag will unlock the door.

    Useful info:

    • Compatible with the following miGuard alarm systems: A11, G5 and KP700 (Keypad)
    • Disarms the alarm with a swipe across the panel
    • Can also unlock a connected Electronic Door Lock
    • Frequency:125KHz WHAT'S IN THE BOX: RFID Tag

  • Solar powered dummy CCTV camera.

    Solar panel with 2-piece Ni-Mh rechargeable 12-volt 500mah batteries, with flashing red light. Solar and battery power allows usage during day and night. Immitation LED's and wire give a realistic look when positioned. Suitable for indoor or outdoor use. Wall mountable with 360° rotating base, supplied with screws and wall plugs.

  • The miGuard G5 awarded 'Intruder Deterrent Product of the Year award'

    The accessories included within the G5 system box (detectors, remote controls, RFID tags), have been pre-programmed to the Control Panel in the manufacturing process - this allows for quick and easy installation. Additional accessories will need to be learnt to the Control Panel (please refer to the product instructions for details)

    Useful info:

    • GSM / SMS Communicating Alarm with integrated Mobile Phone Technology
    • Self-Monitoring with SMS notifications for Alarm, Emergency and Tamper
    • Remote Arm and Disarm by SMS, App or FREE Phone Call
    • Supports up to 50 wireless sensors, 10 remotes, 50 RFID tags

  • The Yale Easy Fit Standard Alarm Kit is the simple way to secure your home and get peace of mind.

    Ready to install straight from the box, this DIY alarm system is designed to be easy to fit without any complex wiring.

    Perfect for a flat, terraced or semi-detached home, just activate and deactivate the alarm by entering your pin code on the keypad. The system is pre-set with a 20 second exit/entry period.

    It can be expanded with more Yale alarm accessories including the Yale Easy Fit Door and Window Contact (see item number 493TW) and Yale Easy Fit Keyfob (493TV).

    Useful info:

    • Yale Easy Fit Standard Alarm Kit
    • Wireless and easy to install
    • Can be expanded with additional sensors
    • Activate or deactivate on the keypad

  • The Yale Easy Fit Smartphone Alarm Kit gives you complete control over your home security no matter where you are.

    The Smartphone Alarm is Yale's top of the range home alarm system, and it can be operated using your own iPhone/Android smartphone or via a standard PC web browser.

    When the alarm is triggered, the PIR camera can take an image of the room and send it direct to your phone so you can see instantly what’s caused the alert. If you’re unlucky enough to fall victim to a burglar, you can provide the police with the image and massively improve your chances of getting your belongings back.

    When the alarm is triggered the siren will start sounding and you will be notified by email and push notification (iOS only) on your smartphone.

    You can add up to 20 different sensors (sold separately) to this system, which also comes with a 2-year guarantee for added peace of mind.

    Useful info:

    • Yale Easy Fit Smartphone Alarm Kit
    • Notifies your smartphone when alarm is triggered
    • Sends you a picture of what has triggered alarm
    • 2-year guarantee
    • Expandable up to 20 devices Features
    • For use with iPhone and Android phones
    • Home internet broadband required

    Please note: The smart phone feature requires the use of Yale’s central server. Yale offers no guarantee on the availability of its server. Yale aims to maintain a server until 2018 and will contact individual users via email should the situation change.

    Alarm event is notified by email, push notification event (iOS only) and SMS message. Yale offers 20 Free SMS messages per account, after which additional SMS messages will be chargeable.

  • The RC80 remote control keyfob enables you to turn the alarm system on and off before entering the home or after exiting. If there is an emergency, press the SOS button the remote control to trigger the panel. Using the Part Arm button, users can alarm all zones except for Zone number one. This is also called the Home Mode. The RC80 is compact and portable; it is designed to fit on a keychain, in a pocket or in a purse.

    Useful info:

    • Arm, Disarm and Part Arm modes
    • Large button design
    • Panic SOS button for emergency use
    • Compact and Portable
    • Designed to fit on a key ring
    • Battery powered
    • Compatible with any miGuard alarm system (A8, A9, A11, G3, G5)
    • Transmit distance: 80m (open area)

    WHAT'S IN THE BOX: Remote control x 1 CR2025 battery x 1 Installation and Operating Instructions.

  • Upgrade your home security with the miGuard A11wireless alarm system, including instant messages to up to 6 phones if you suffer a break-in.

    There's no need to rely on the neighbours responding to your alarm going off when you can phone the police yourself – or have a security firm automatically informed to ensure a super-fast response.

    You can also control the alarm system via an app on your smartphone, including checking the alarm is on while you're out of the house – and activating it (or deactivating it) if necessary. There's even an option to leave messages when the next person arrives home!

    When an alarm condition occurs, a recordable 10 second voice memo and alarm voice message will be played. A Duress code can be used, which will enable the alarm to send out an activation notification silently. A wirefree external solar siren can easily be added for additional protection.

    The control panel has a touch keypad and LCD display with a guide menu for easy programming.

    The panel can be disarmed using the RFID tags, and unlock an electronic door lock. The PSTN panel can store 6 phone numbers and 2 ADEMCO CID CMS numbers.

    Useful info:

    • Touch keypad with LCD display
    • Stores 6 alarm phone numbers plus 2 central monitoring station numbers
    • Remote arm/disarm
    • Supports up to 50 wireless sensors, 10 remotes, 50 RFID tags
    • Listen-in feature with 2 way talk & monitoring
    • Voice memo feature
    • Internal Siren Volume: Off, Low, High
    • Tamper protection
    • miGuard A11 communicating wireless alarm system
  • Book safe box.

    Lockable steel case covered with imitation book cover. Enabling user to easily conceal on bookshelf or elsewhere as any everyday security box. Includes metal liner for additional protection. Supplied with two keys.

    Outer dimensions: 26.5 x 19.5 x 6.5 cm.

    Inner dimensions: 25.5 x 18.5 x 6 cm.

  • This wireless Door entry Intercom Doorbell System allows you to have a 2-way conversation with the visitor at your door. When your doorbell rings you can safely and conveniently answer it from within your home using the handset. With no wiring required between the Outdoor Station (intercom/doorbell) and the Indoor handset, this intercom system is quick and easy to install and set-up. The CL6011B is suitable for both residential and commercial use and has a long operating range of up to 150m between the handset and the outside station (intercom/doorbell).

    Useful info:

    • Intercom Handset
    • Simple to set-up and operate
    • Wireless Audio Intercom and Digital technology
    • Long operating range up to 150m, between outdoor station and handset
    • 2-way communication between Handset and intercom
    • 5 ring tones with 5 ring volume levels
    • Visual ringer, power indicator and in use indicator
    • Charger base with charge indicator
    • Single Button door release (requires CL3660UM) available separately
    • Carrying clip Outdoor Station/Doorbell
    • Outdoor station includes customisable nameplates
    • Intercom/doorbell (outdoor station) IP56 rated
    • Customisable nameplates x2
    • Outdoor station can be mains powered (requires PSU CLOSPSU) available separately

  • The Yale Easy Fit Telecommunicating Alarm calls you when it’s triggered, giving you complete peace of mind no matter where you are.

    This simple-to-install DIY home alarm system harnesses pre-programmed wire-free technology so it doesn’t require complex installation.

    It can store up to 3 telephone numbers, such as your home, mobile and work numbers and will call them in a specified sequence if it's activated. It can be turned on and off using a touchtone phone for added convenience.

    This alarm features intuitive touch screen controls, movement detectors and door contact sensors. The system can be expanded to include up to 30 different sensors including the Yale Easy Fit Door and Window Contact (see item number 493TW) and Motion Sensor (493TY) to make your property even more secure.

    Useful info:

    • Yale Easy Fit Telecommunicating Alarm
    • Includes Siren Box Dummy and siren
    • Comes with 2 PIR movement detectors
    • Includes 2 door contact sensors
    • Touch screen control panel
    • 2-year guarantee
    • Expandable to include up to 30 devices

  • The P900 is a high performance wireless PIR movement sensor. It consists of a digital dual-core fuzzy logic infrared control chip and intelligent analysis which effectively identifies interference signals from body movement signals and reduces false alarm rate. With automatic temperature compensation and anti-air turbulence technology, it easily adapts to environmental changes. The detector also has the advantages of energy saving, reliability and easy installation.

    WHAT'S IN THE BOX: Passive Infra-Red PIR Detector x 1 Bracket x 1 Fixing Screw Pack AA 1.5V LR6 battery x 2 Installation and Operating Instructions.

    Useful info:

    • Detection coverage: 8m/110°
    • Temperature compensation control
    • Anti-Air turbulence technology
    • Walk test mode
    • Battery powered
    • Energy Saving
    • Low power LED indication
    • Low battery notification (available only when connected to G5 / G3 GSM panel)
    • Tamper protection
    • Internal antenna
    • Compatible with any miGuard alarm system (A8, A9, A11, G3, G5)
    • Transmit distance: 80m (open area)

Results: 1 - 12 (of 31)  |  Show all
31 products from £5.00 to £549.00
rated 4.8 out of 5 based on 32 customer reviews.
isNew is true
isReturning is false
isRegistered is false
gender is Unknown
ageTargeting is
isEligibleForBnpl is false
marketingCampaign is
targetedOffersAsString is
accountNumber is